Hasselblad XPan II - Manual (Page 14)

Not For Resale – Free Download at http://www.joe-chan.com/manuals
14
Format
Standard
░ 24a ░
For the standard 35 mm format (24 mm x 36 mm) turn
the format selector knob to align the indexes (counter-
clockwise if already set at the panorama format) while
keeping the centre button depressed. The viewfinder
will automatically display the correct format framing
and the exposure counter will indicate the number of
frames remaining at that chosen format.
Panorama
░ 24b ░
From the standard format, turn the format selector
knob clockwise while keeping the centre button de-
pressed and align the indexes to the panorama format.
The letter P will be visible on the top of the dial. Again
the viewfinder will automatically display the correct
format framing and the exposure counter will indicate
the number of frames remaining though now for the
panorama format. The expLCD also displays a P in the
top left of the window.
Ensure you turn the knob as far as it will go to the stop posi-
tion when selecting the panorama format.
A flashing
P in the expLCD together with a locked shutter
release indicates that either the format selector knob is not
positioned correctly or that you have switched from standard
to panorama format when only one standard sized unex-
posed frame remained on the film.
Programming
Programming of camera settings
░ 25 ░
The following settings can be programmed:
• Film speed (ISO 25 -3200, Auto (DX))
• Exposure compensation (-2 to +2 f/stop in 0.5 f/stop
increments)
• Auto-bracketing f+/- 0.5 f/stop or +/-7 f/stop)
• Multi exposure (2-9 exposures)
• Flash sync (at the beginning "N" or at the end "R" of
the exposure)