Humminbird VHF255SW - Manual (Page 57)

56
GPS/TIME SUBMENU: MANUALLY ENTER GPS DATA
If no GPS data is available, the NO GPS icon appears, and POS DATA REQ is displayed
with NO GPS. An alert will sound for 5 seconds or until any key is pressed. The manual
entry function is valid if and only if no GPS Receiver is connected.
To manually enter GPS Data:
1. From the GPS/Time Submenu, select MANUAL to see the Manual Position
display.
2. Enter the latitude, then the longitude, then the UTC time.
3. Press the CH/ENTER knob when all the information is correct. The boat’s lat/lon
with the UTC time will be shown on the LCD.
NOTE: The manual entries will be overwritten automatically if the radio is connected to an
optional-purchase GPS Receiver and a new GPS position is received.
GPS / TIME
>MANUAL
SETTINGS
MANUAL POS
_ _ . _ _ . _ _ _ _ N
_ _ _ . _ _ . _ _ _ _ E
_ _ . _ _ UTC
DISTRSS
22.28.1111 N
112 0.11.0011 W
08.25 UTC
CONTACTS
LOCAL/DIST
BACKLIGHT
CONTRAST
>GPS/TIME
RADIO SETUP
DSC SETUP
RESET
EXIT
>MANUAL
SETTINGS
MANUAL POS
_ _ . _ _ . _ _ _ _ N
_ _ _ . _ _ . _ _ _ _ E
_ _ . _ _ UTC