Humminbird VHF255SW - Manual (Page 71)

70
DSC SETUP: POSITION REPLY
You can set the radio to respond to a Position Request in one of three ways: Automatic,
Manual, or Off (no response).
1. From the DSC Setup Submenu, select POS REPLY, then choose either
AUTOMATIC, MANUAL, and OFF using the CH/ENTER knob.
DSC SETUP: RESET
This feature resets most settings to the factory defaults, except for the USER MMSI and
the Contact List.
1. From the DSC Setup Submenu, select RESET; the radio will ask for
confirmation.
2. Select YES, then press the CH/ENTER knob to reset the radio.
CONTACTS
LOCAL/DIST
BACKLIGHT
CONTRAST
GPS/TIME
RADIO SETUP
DSC SETUP
RESET
EXIT
RESET
ARE YOU
SURE?
NO
>YES
ALL USER
SETTINGS
RESTORED
TO DEFAULT
USER MMSI
GROUP MMSI
INDIV REPLY
DSC ENABLE
>POS REPLY
POS REPLY
>AUTOMATIC
MANUAL
OFF