Hasselblad CF22 CF39 - Manual (Page 17)

1
1 
 
 
Press and hold  until the display begins
to flash (or stops flashing) its overexposed
areas.
See ‘Overexposure Indicator’ for full details.
Press and hold until your preferred filter is
indicated.
See ‘Using Instant Approval Architecture’ for
full details.
Select the target image and then press and
hold

until the delete dialog opens.
See ‘MAIN MENU > Delete’ for full details.
To toggle the over-
exposure indicator
To set the browse filter
To delete images
In this manual you will see the following kind of description
regarding settings changes (as opposed to general viewing and
browsing etc).
The method is the same for all changes, some stages taking a little
longer than others and being a little more involved.
The following is an example of a setting change :
Setting the menu language
The menu is available in English, French, German, Italian,
Spanish, Japanese and Chinese.
To choose any of the above languages, proceed as follows:
1. Press the MENU/EXIT ( ) button to open the menu.
2. Press the NAVIGATOR button ( and ) to select the
SETTINGS sub-menu.
3. Press the NAVIGATOR button () to open the SETTINGS
menu.
4. Press the NAVIGATOR button () to select the USER
INTERFACE sub-menu.
5. Press either ZOOM button ( or ) to choose a new lan-
guage (in this case, Spanish).
6. Press the MENU/EXIT ( ) button again to close the menu.
Menu Shortcuts !
To help you work faster, the digital back provides shortcuts to some
of the most commonly used menu commands that do not otherwise
have a dedicated button on the front panel. These are accessible by
pressing and holding one of the front-panel buttons for a second or so.
These are mentioned where appropriate elsewhere in this manual, but
we summarize them here for your convenience.
Francis Hills Fashion
created using liveBooks, www.live-books.com copyright Francis Hills