Hasselblad CF22 CF39 User Manual
Page 41
1
1
COPY
Usually, you will copy images from a card by connecting the cam-
era to a computer and using FlexColor. However, you might also
want to load images from a card to a portable FireWire hard disk
or Imagebank, allowing you to erase the card and keep shooting
even when you do not have a computer with you.
After the copy, the destination disk will have a folder named
CARDXXX, where XXX is a number that increments with each
new copy operation (e.g., CARD001 for the first copy, CARD002
for the next, etc.). Previous copies are therefore never overwritten
(provided you have fewer than 1000 folders of them). Within each
CARD folder is a sub-folder for each batch. You cannot use the
digital back to browse images copied in this way; you must connect
the disk to a computer to browse the copied folders. This operation
does not delete the copied images from the card—you must do this
manually if you want to free card space after the copy.
To copy images from the compact-flash card to external media,
use a FireWire cable to connect the external media to a CF digital
back and then.
1. Press the
MENU button.
2. Press to navigate down and select the Storage dialog.
3. Press and then to navigate down and select the Copy
dialog. Press to open the Copy dialog.
4. If you have only one disk attached, then skip this step.
If you have more than one disk attached, then press to
select the From card to entry. Then use the or button to
select the name of the medium you want to copy to. Finally,
press to go back to the Are you sure? entry.
With the
Are you sure? entry selected, you must now con-
firm the operation.
• To confirm, press the button to change the status to Yes
and then press the approve (OK) button to execute the copy.
• To cancel, press the menu (
EXIT) button to exit; or press the
button to set the status to No and then press the approve
(OK) button to cancel.
If you chose to confirm, then the digital back now tracks the
progress of the copy operation, which can take a few min-
utes. You can stop the copy at any time by pressing and hold-
ing the menu (STOP) button.
5. You now return to the
STORAGE menu. Either move on to
another setting by using the navigator button or press the
menu (EXIT) button to exit the menu system.