Manage your network settings, Print network settings, Restore network defaults – HP C309 User Manual
Page 14: Turn the wireless radio on and off
Manage your network settings
The HP Photosmart control panel enables you to perform a variety of network
management tasks. This includes printing the network settings, restoring the network
defaults, turning the wireless radio on and off, and printing a wireless network test.
Print network settings
You can display a summary of the network settings on the HP Photosmart control panel,
or you can print a more detailed configuration page. The network configuration page lists
all of the important network settings such as the IP address, link speed, DNS, and mDNS.
1.
Press Setup.
2.
Press the down arrow button until Network is highlighted, and then press OK.
3.
Press the down arrow button until View Network Settings is highlighted, and then
press OK.
4.
Do one of the following:
•
To display wired network settings, press the down arrow button until Display
Wired Summary is highlighted, and then press OK.
•
To display wireless network settings, press the down arrow button until
Display Wireless Summary is highlighted, and then press OK.
•
To print the network configuration page, press the down arrow button until
Print Network Configuration Page is highlighted, and then press OK.
Restore network defaults
You can reset the network settings to what they were when you purchased the
HP Photosmart.
1.
Press Setup.
2.
Press the down arrow button until Network is highlighted, and then press OK.
3.
Press the down arrow button until Restore Network Defaults is highlighted, and then
press OK.
4.
Press OK to confirm that you want to restore the network defaults.
Turn the wireless radio on and off
The wireless radio is off by default, but when you install the software and connect the
HP Photosmart to the network, the wireless radio is turned on automatically. The blue
light on the front of the HP Photosmart indicates that the wireless radio is on. In order to
stay connected to a wireless network, the radio must stay on. However, if the
HP Photosmart is connected directly to a computer with a USB connection, the radio is
not used. In this case you might want to turn the radio off.
1.
Press Setup.
2.
Press the down arrow button until Network is highlighted, and then press OK.
3.
Press the down arrow button until Wireless Radio is highlighted, and then press
OK.
4.
Press the down arrow button to highlight On or Off, and then press OK.
Chapter 1
12
Network setup
N
etwork set
up