HP 1240 Series User Manual
Page 4
© 2004 Copyright Hewlett-Packard
Development Company, L.P.
The information herein is subject to
change without notice.
Reproduction, adaptation or
translation without prior written
permission is prohibited, except as
allowed under the copyright laws.
Publication number: Q5621-90108
First edition: January 2004
notice
The only warranties for HP products
and services are set forth in the
express warranty statements
accompanying such products and
services. Nothing herein should be
construed as constituting an
additional warranty. HP shall not be
liable for technical or editorial errors
or omissions contained herein.
The Hewlett-Packard Company shall
not be liable for incidental or
consequential damages in connection
with, or arising out of the furnishing,
performance, or use of this document
and the program material which it
describes.
Note: Regulatory information can be
found in the Technical Information
chapter of this guide.
It is not lawful in many places to make
copies of the following items. When in
doubt, check with a legal
representative first.
•
Governmental paper or
documents:
-
Passports
-
Immigration papers
-
Selective service papers
-
Identification badges, cards, or
insignias
•
Governmental stamps:
-
Postage stamps
-
Food stamps
•
Checks or drafts drawn on
Governmental agencies
•
Paper currency, traveler’s checks,
or money orders
•
Certificates of deposit
•
Copyrighted works
safety information
Warning!
To prevent
fire or shock hazard, do
not expose this product
to rain or any type of
moisture.
Always follow basic safety
precautions when using this product to
reduce risk of injury from fire or
electric shock.
Warning!
Potential
shock hazard
1
Read and understand all
instructions in the setup poster.
2
Use only a grounded electrical
outlet when connecting the
device to a power source. If you
do not know whether the outlet is
grounded, check with a qualified
electrician.
3
Observe all warnings and
instructions marked on the
product.
4
Unplug this product from wall
outlets before cleaning.
5
Do not install or use this product
near water or when you are wet.
6
Install the product securely on a
stable surface.
7
Install the product in a protected
location where no one can step
on or trip over the line cord, and
where the line cord will not be
damaged.
8
If the product does not operate
normally, see the online
Troubleshooting help.
9
No operator-serviceable parts
inside. Refer servicing to
qualified service personnel.
10
Use in a well-ventilated area.