HSM 411.2 - Manual (Page 14)

Paper shredder HSM 411.2
14 english 0603
Declaration of Conformity
Machinery directive 98 / 37 / EG
EMC directive 89 / 336 / EWG
Low voltage directive 73 / 23 / EWG
The manufacturer HSM Pressen GmbH + Co. KG, Bahnhofstraße 115, D-88682 Salem
declares herewith, that the paper shredders HSM 411.2 aboved mentioned correspond with the EC Machine Directive inclu-
ding all relevant modifi cations.
Applied standards and technical specifi cations:
• EN 55014-1:2000 + A1:2001 + A2:2002
• EN 61000-4-4:1995 + A1:2001 + A2:2001
• EN 55014-2:1997 + A1:2001 • EN 61000-4-5:1995 + A1:2001
• EN 61000-3-2:2000 • EN 61000-4-6:1996 + A1:2001
• EN 61000-3-3:1995 + A1:2001 • EN 61000-4-11:1994 + A1:2001
• EN 61000-4-2:1995 + A1:1998 + A2:2001 • EN 60950-1:2001
• EN 294:1992
Salem, 01.07.2003
Rolf
Gasteier - Technical Director
Machine type inspection for compliance with the requirements of the EC Machine Directive was carried out by the „Admi-
nistration“/Inspection Authority Committee of Experts, Subject Area „Offi ce Machines and Devices“, on the premises of the
Verwaltungs-Berufsgenossenschaft, Deelbögenkamp 4, D-22297 Hamburg. This inspection authority is the authority respon-
sible in accordance with Annex V of the EC Machine Directive.
9. Scope of delivery
• Paper shredder, ready for connection, in
carton packing, carton on pallet, tied with
strapping tape
• 5 bags for shredded material
• Special cutting block oil (250 ml)
• Operating instructions, information sheet on
unpacking
Acces so ries
• Bag for shredded material,
order No.: 1.442.995.000
• Special cutting block oil 250 ml,
order No.: 1.235.997.401