Honeywell KMA28 User Manual
Bendix/king, Kma 28
Advertising
Installation and Operation Manual
BENDIX/KING
BENDIX/KING
BENDIX/KING
BENDIX/KING
®
KMA 28
FAA-Approved TSO C50c, C35d
JAA-Approved JTSO-2C35d, C50c
Audio Amplifier /Intercom/
Marker Beacon Receiver
Document P/N 006-10565-0000
REVISION 0, SEPTEMBER 2000
WARNING
Prior to export of this document, review for export license requirement is needed.
Honeywell International, Inc. 2000©
Copyright Notice
Reproduction of this publication, or any portion thereof, by any means without the express written permission of Honeywell
International, Inc. is prohibited. For further information contact the Manager, Technical Publications; Honeywell Business &
General Aviation, Olathe, Kansas 66061. Phone (913) 782-0400.
Advertising
Table of contents
Document Outline
- Section I GENERAL INFORMATION
- Section II - Installation
-
- SCOPE
- Certification Requirements
- Cooling Requirements
- Mounting Requirements
- Mounting Rack Installation
- Connector Assembly
- Noise
- Existing KMA-24 Installation
- Existing PS Engineering PMA6000 installations
- Power
- Communications Push-to-Talk
- Transmit Interlock
- "Swap" Mode
- Backlighting
- Unswitched inputs
- Intercom wiring
- Com 3 Audio
- Public Address function
- PA Mute (J1, Pin 18)
- Control Output (J2, Pin A)
- VOX Override (J2, Pin U)
- Middle Marker Sense
- External Marker Lights
- Marker Antenna Installation
- Communications Antenna Installation Notes
- Wireless telecommunications interface
- KMA 28 Pin Assignments
- Post Installation Checkout
- Unit Installation
- Cellular Interface Checkout
- Final Inspection
-
- Section III KMA28 OPERATION
- Appendix A – Installation Drawings
- Appendix B Bottom Connector Interconnect
- Appendix C Top Connector Interconnect
- Appendix D- Instructions for FAA Form 337 and Continuing Airworthiness
- Instructions for Continuing Airworthiness,
- Appendix E RTCA DO160C (EUROCAE ED-14) Environmental Qualification Form