Getting started, Loading the sim card, Unloading the sim card – Husqvarna VODAFONE 830 User Manual

Page 11: Getting started 5, Loading the sim card unloading the sim card

Advertising
background image

5

2

Getting Started

Loading the SIM Card

Load your SIM card before using your phone. To use
the SIM card properly, please read the following
instructions carefully.

Note

• Keep the SIM card out of the reach of chil-

dren.

• The SIM card and its metal contacts can be

easily damaged by scratching or bending.
Ensure care when you carry, load or remove
it.

• Always disconnect the charger from the

phone before loading or removing the SIM
card.

To load the SIM card, do as follows:

1

Position the card at the card slot entrance, mak-
ing sure it is facing the same way as shown in
the diagram below, with the notched corner at
the down left. Then slide in as shown.

2

Fit the battery into the battery slot on back of the
phone. Press the battery down until it clicks into
place.

3

Slide the back cover to the phone.

Unloading the SIM Card

Only unload the SIM card and the battery after pow-
ering off your phone. Otherwise, your phone may be
damaged.

To unload the SIM card:

Advertising