Husqvarna VODAFONE 830 - Manual (Page 13)

Charging the Battery
7
2
G
e
tt
ing S
ta
rte
d
Before charging the battery with a cable charger,
ensure that the battery has been properly loaded into
your phone. To charge the battery, do as follows:
1 Insert the plug of the charger into the connector
of the phone as shown in the following figure.
2 Plug in the connector of the charger to a power
socket.
Note
• The plug of the charger is in trapezium
shape. Reversely inserting the plug may
damage the mobile phone and charger. The
connection methods of USB data cable and
headset are the same as the charger.
• When the battery power level is very low, the
phone makes alert sounds and displays a
prompt. When the battery power level is too
low, the phone will power off automatically.
• When the battery is being charged, the charg-
ing indicator blinks continuously. When the
charging indicator stops blinking, it indicates
that the battery is full.
Loading/Removing a Memory
Card
The Vodafone 830 phone supports a memory card
(micro-SD) with a capacity up to 2 GB.
1 Insert the memory card into the slot, as shown in
the following figure.
2 To remove a memory card, press the memory
card gently. Now the memory card will pop up
automatically. Then take it out as shown in the
following figure.
With metallic contact upward