Harbor Freight Tools 93011 User Manual
Page 4
SKU 91098
TOOL USE AND CARE
14.
Do not force the tool. Use the correct tool for your application. The correct tool
will do the job better and safer at the rate for which it is designed.
15.
Disconnect the Power Cord Plug from the power source and allow the unit to
cool before making any adjustments, changing accessories, or storing the
tool.
16.
Store idle tools out of reach of children and other untrained persons. Tools
are dangerous in the hands of untrained users.
17.
Maintain tools with care. Keep tools and clean. Do not use a damaged tool. Tag
damaged tools “Do not use” until repaired.
18.
Check for misalignment or binding of moving parts, breakage of parts, and
any other condition that may affect the tool’s operation. If damaged, have the
tool serviced before using. Many accidents are caused by poorly maintained
tools.
19.
Use only accessories that are recommended by the manufacturer for your
model. Accessories that may be suitable for one tool may become hazardous
when used on another tool.
SERVICE
20.
Tool service must be performed only by qualified repair personnel. Service or
maintenance performed by unqualified personnel could result in a risk of injury.
21.
When servicing a tool, use only identical replacement parts. Follow
instructions in the
“Inspection, Maintenance, And Cleaning”
section of this
manual. Use of unauthorized parts or failure to follow maintenance instructions
may create a risk of electric shock or injury.
PAGE 4
SPECIFIC SAFETY RULES
1.
Maintain labels and nameplates on the Steamer. These carry important
information. If unreadable or missing, contact Harbor Freight Tools for a replacement.
2.
Always wear safety impact eye goggles when using the Steamer. Using personal
safety devices reduce the risk for injury. Safety impact eye goggles are available
from Harbor Freight Tools.
3.
Maintain a safe working environment. Keep the work area well lit. Make sure
there is adequate surrounding workspace. Always keep the work area free of
obstructions, grease, oil, trash, and other debris. Do not use a power tool in areas
near flammable chemicals, dusts, and vapors. Do not use this product in a damp or
wet location.