Honeywell PERFECT WINDOW ER150C - Manual (Page 4)

ER150 AND ER200 Perfect Window™ FRESH AIR VENTILATION SYSTEMS
69-1563-1 4
.
3. Energy Transfer Core
As the exhaust and fresh air pass through opposite sides of the Energy Transfer
Core heat is transferred from the warm side to the cold side. This heat transfer
reduces the cost of conditioning the fresh outside air that is brought into your
home. In addition, moisture is transferred from the wet side to the dryer side.
This moisture transfer reduces the drying of the air inside your home that occurs
during the winter months and reduces the amount of moisture that is brought into
your home during the summer months. The core removes easily for cleaning.
4. Controls - Speed Control
Easy operation, simply rotate the Perfect Window™ ventilator fan speed control
to your desired setting.
Operating your Fresh Air Ventilation System
Changing Fan Speed
The control fan speed is conveniently located on the ventilator. The rotary fan speed
control knob can be manually set from the off (standby) position through speeds 1 to 4.
Note the fifth speed (high) is accessible only by a remote control.
Off/standby mode may be used if intermittent ventilation is desired. In the off/standby
position, the ventilator will not function until energized by a remote control, see
information below.
CORE INSTRUCTIONS
CABINET
ENERGY TRANSFER CORE
FILTERS (2)
CORE GUIDE
CHANNEL (4)
DUCTING
(4 PORTS)
SQUIRREL
CAGE FAN
MAIN MOTOR
DOOR KEEPER PLATE (2)
INSULATED
ACCESS DOOR
M20143