Heath Zenith Lighting Control Panel 598-1136-04 User Manual

Lighting control panel, Features, Battery installation and battery backup

Advertising
background image

© 2007 HeathCo LLC

598-1136-04

Lighting Control

Panel

Features

• Operational range of up to 100 feet.
• Controls all Heath

®

/Zenith RF Tech Communica-

tions™ products.

• Adds programmable ON/OFF function for up to

16 lighting controls.

• UL/cUL listed power supply.
• FCC/IC tested and approved.
• 12/24 Hour Digital Clock Display.
• 9 volt battery backup to prevent program loss

due to power failure (9V battery not included).

• Flash control on compatible receivers when using the Panic feature.

Battery Installation and Battery Backup

The Lighting Control Panel is designed for 120VAC operation using the included
DC power converter, but has the added feature of an onboard battery backup
to prevent program memory loss. To install battery:
1. Remove battery cover on rear of

housing by sliding cover down.

2. Install 9 volt battery (not included)

according to polarity markings.

3. Close battery compartment by re-

versing the previous instructions.

Upon power failure, the battery backup
will automatically shut down all non-
essential functions. The display and
keypad will not work. The battery
backup will last in excess of 5 hours.
When power is restored, the unit will
restart the display and set all channels
to the OFF position. All programming
will be maintained unless the battery is
depleted. If the battery is depleted, reprogramming of the time and automated
functions will be required.
Note: If Lighting Control Panel will be disconnected from 120VAC power for
a prolonged period of time, disconnect 9V battery connector from battery to
prevent discharging of battery.

ON

OFF

DIM

GR

OUP

A

B

1

2

MO

DE

ALL

ON

ALL

OFF

PANI

C

ON

OFF

DIM

ON

OFF

DIM

ON

OFF

DIM

ON

OF

F

DIM

ON

OFF

DIM

ON

OFF

DIM

ON

OFF

DIM

AM

A

PM

9V Battery

Battery
Cover

DC Power
Connector

9 Volt
Battery (Not
Included)

Battery Connector

Installing 9 Volt Battery and

DC Power Connector

It is recommended that the battery is replaced at least once a year. You might
want to choose a date that will be easy to remember (i.e. Birthday, Anniversary,
New Years, Daylight savings time changes, etc.).

Advertising