Harbor Freight Tools CENTRAL PNEAMATIC 95386 - Manual (Page 7)

Page 7 For technical questions, please call 1-800-444-3353. SKU 95386
plugged into a matching outlet that
is properly installed and grounded in
accordance with all local codes and
ordinances.
Do not modify the plug provided –
2.
if it will not fit the outlet, have the
proper outlet installed by a qualified
electrician.
Improper connection of the
3.
equipment-grounding conductor can
result in a risk of electric shock. The
conductor with insulation having
an outer surface that is green with
or without yellow stripes is the
equipment-grounding conductor. If
repair or replacement of the electric
cord or plug is necessary, do not
connect the equipment-grounding
conductor to a live terminal.
Check with a qualified electrician or
4.
service personnel if the grounding
instructions are not completely
understood, or if in doubt as to
whether the compressor is properly
grounded.
Use only 3-wire extension cords that
5.
have 3-prong grounding plugs and
3-pole receptacles that accept the
compressor’s plug.
Repair or replace damaged or worn
6.
cord immediately.
120 V~ 3-Prong Plug and outlet
(for up to 120 V~ and up to 15 a)
Grounding
Pin
This compressor is intended for use 7.
on a circuit that has an outlet that
looks like the one illustrated above
in 120 V~ 3-Prong Plug and outlet.
The compressor has a grounding
plug that looks like the plug illustrated
above in 120 V~ 3-Prong Plug and
outlet.
The outlet must be properly installed
8.
and grounded in accordance with all
codes and ordinances.
Do not use an adapter to connect this
9.
compressor to a different outlet.
Symbology
Double Insulated
Canadian Standards Association
Underwriters Laboratories, Inc.
V~
Volts Alternating Current
a
Amperes
n0 xxxx/min.
No Load Revolutions per Minute
(RPM)