HONDA 08B26-S5T-1000-91 User Manual
Page 6
6 of 14
AII 27936 (0408)
©
2004 American Honda Motor Co., Inc - All Rights Reserved.
1
2
REAR CLIP
HOOKS (4)
15. Remove the rear seat cushion bolt, and remove
the rear seat cushion by lifting the rear of the
cushion to release the hooks and then pulling it
toward you.
16. Remove the clip that secures the floor carpet.
17. Fold the right rear seat-back forward. Remove the
hinge cover from the seat-back (three retaining
clips). Take care not to damage the retaining clips.
20. Remove the left rear seat-back center hinge (one
bolt).
21. Remove the clip from the floor panel behind the
seat-back.
22. Release the seat-back pin from the left rear side
panel trim by sliding the seat-back forward while
pushing it toward the outside. Remove the left rear
seat-back.
23. Open the screw lid from the left rear side shelf.
Remove the two self-tapping screws, and separate
the left rear side shelf from the C-pillar trim. Push
down to release the rear clip hooks, then pull the
shelf out toward you to remove it.
REAR
SEAT
CUSHION
HOOK
HOOK
BOLT
CLIP
FLOOR
CARPET
CLIP
SEAT-
BACK
CENTER
HINGE
LEFT REAR
SEAT-BACK
LEFT REAR
SIDE PANEL
TRIM
LEFT PIN
1
2
BOLT
22 N·m
(16 lb-ft)
REAR SEAT
BELT
REAR SIDE
SHELF
SELF-TAPPING
SCREW
SCREW LID
C-PILLAR
TRIM
BOLT 22 N·m
(16 lb-ft)
CLIP
RETAINING
TAB
HINGE
COVER
SEAT BELT
ANCHOR
RIGHT REAR
SEAT-BACK
SEAT-BACK
CENTER HINGE
18. Remove the clip from the floor panel behind the
seat-back.
19. Remove the two bolts that fasten the seat-back
hinge bracket, and move the right rear seat-back
out of the way.