Maintenance, Cleaning and storage – Hunter Fan ULTRASONIC 31206 User Manual

Page 7

Advertising
background image

7

©2011 Hunter Fan Company

Maintenance

Cleaning and Storage

3

note: ALWAYS unplug the humidifier from the electrical outlet before cleaning.

NEVER allow water to sit in the tank when not in use.

daily Maintenance:

1. Turn off the humidifier and unplug it from the wall outlet.

2. Remove the tank unit by pulling it straight off the humidifier base.

3. Turn the tank upside down and drain any water into a sink or tub. Shake the

unit gently to remove any remaining water.

4. Rinse the tank thoroughly with water, empty, and wipe with a dry, clean cloth.

5. Wipe the humidifier base with a dry cloth if necessary.

6. Refill the tank as directed under “Initial Setup and Operation” on page 5 and

resume use.

Weekly Maintenance:

1. Turn off the humidifier and unplug it from the wall outlet.

2. Remove the tank unit by pulling it straight off the humidifier base.

3. Turn the tank upside down and drain any water into a sink or tub. Shake the

unit gently to remove any remaining water.

4. Fill the Water Tank with a mixture of one (1) gallon of water and eight (8)

ounces of white vinegar. Leave the mixture in the Water Tank for 20 minutes,

giving the Water Tank a shake every few minutes. After 20 minutes, give the

Water Tank a final shake and discard the mixture.

5. Rinse the Water Tank several times with clean water. Leave the Water Tank

Cap off to allow the Water Tank to dry completely.

6. Wipe the surfaces of the main housing with a soft damp cloth.

7. Once all the parts are clean and dry, reassemble the humidifier, refill the

water tank and resume use.

note: The tank has built-in antimicrobial properties to inhibit the growth of

bacteria, mold, and fungi that may affect the water in the tank. Daily and weekly

maintenance is still necessary to prevent the growth of bacteria, mold, and fungi.

end of Season Maintenance:

1. Follow the instructions for weekly maintenance before storing the unit.

2. Ensure all parts are completely dry before storing the unit.

3. Store the unit in a cool dry place.

4. Never store the unit with water in the tank.

Advertising
This manual is related to the following products: