HP T250 - Manual (Page 51)

6.1.7 Motion Detection
When the Motion Detection is enabled, the camcorder will
automatically begin recording when a few seconds of movement is
detected. The camcorder will stop recording a few seconds after
no further motion is detected. When this feature is enabled, the
camcorder will NOT automatically shut down due to the power
saving mode.
1. Power on the camcorder and make sure it is in the DV Mode.
51
2. Touch the icon or press the Menu Button ( ) then
touch the Motion Detection option to display the submenu.
3. Touch the desired Motion Detection option to enable or disable
the function as illustrated below. After an option is selected, the
Menu screen will be displayed again. The default setting is
disabled.
4. Touch the icon to return to video recording mode.