HP T250 - Manual (Page 63)

6.3.8 Burst
This feature will continuously and automatically shoot three pictures
in approximately 1 second by pressing the Recording Button ( ).
1. Power on the camcorder and make sure it is in the DSC Mode.
63
2. Touch the icon or press the Menu Button ( ) then
touch the Burst Mode option to display the submenu.
3. Touch the desired Burst Mode option to enable or disable the
function as illustrated below. After an option is selected, the
Menu screen will be displayed again. The default setting is
disabled. The default setting is off.
4. Touch the icon to return to DSC recording mode.