HONDA Honda Engine GXV340 - Manual (Page 16)

ENGLISH
Specifications Air Index
Applicable to Emissions Durability
Period Descriptive Term
Tuneup Specifications
ITEM SPECIFICATION MAINTENANCE
GXV340
GXV390
16
433 382 406 mm
(17.0 15.0 16.0 in)
31 kg (68 lbs)
4-stroke, overhead valve, single cylinder
338 cm (20.6 cu-in)
[82 64 mm (3.2 2.5 in)]
300 hours [0 65 cm (0 65 cc)]
500 hours [greater than 65 cm (65 cc)]
125 hours [0 65 cm (0 65 cc)]
250 hours [greater than 65 cm (65 cc)]
50 hours [0 65 cm (0 65 cc)]
125 hours [greater than 65 cm (65 cc)]
Extended
Intermediate
Moderate
An Air Index Information hang tag/label is applied to engines
certified to an emission durability time period in accordance with
the requirements of the California Air Resources Board.
The bar graph is intended to provide you, our customer, the ability
to compare the emissions performance of available engines. The
lower the Air Index, the less pollution.
The durability description is intended to provide you with
information relating the engine’s emission durability period. The
descriptive term indicates the useful life period for the engine’s
emission control system. See your
Emission Control System
Warranty for additional information.
The Air Index Information hang tag/label must remain on the
engine until it is sold. Remove the hang tag before operating the
engine.
6.6 kW (9.0 PS, 8.9 bhp) at 3,600 rpm
21.6 N·m (2.20 kgf·m, 15.9 lbf·ft)
at 2,500 rpm
1.10 (1.16 US qt , 0.97 Imp qt)
Length Width
Height
Dry weight
Engine type
Displacement
[Bore
Stroke]
Max. output
Max. torque
Engine oil capacity
Fuel tank capacity
Fuel consumption
Cooling system
Ignition system
PTO shaft rotation
2.1
2.3 /h at 3,000 rpm
Forced air
Transistorized magneto
Counterclockwise
Length Width
Height
Dry weight
Engine type
Displacement
[Bore
Stroke]
Max. output
Max. torque
Engine oil capacity
Fuel tank capacity
Fuel consumption
Cooling system
Ignition system
PTO shaft rotation
433 382 406 mm
(17.0 15.0 16.0 in)
32 kg (71 lbs)
4-stroke, overhead valve, single cylinder
389 cm (23.7 cu-in)
[88 64 mm (3.5 2.5 in)]
7.6 kW (10.3 PS, 10.2 bhp) at 3,600 rpm
24.2 N·m (2.47 kgf·m, 17.8 lbf·ft) at
2,500 rpm
1.10 (1.16 US qt , 0.97 Imp qt)
2.1
2.5 /h at 3,000 rpm
Forced air
Transistorized magneto
Counterclockwise
Spark plug gap
Idle speed
Valve clearance
(cold)
Other
specifications 1,400 150 rpm
IN: 0.15 0.02 mm
EX: 0.20 0.02 mm
0.70 0.80 mm
(0.028 0.031 in)
Refer to page: 10
See your
authorized
Honda dealer
No other adjustments needed.
05/04/12 20:13:22 32Z5N600_016