Honeywell ELECTRONIC REFRIGERATION CONTROL PCR-300 - Manual (Page 3)

3
1 Unpacking the unit and conditions of use
Before and when unpacking the unit, make a visual inspection to
identify any possible damage which may have occurred during
transportation. Please look for loose parts, dents, scratches, etc.
Report any damage immediately to the freight company. (Please see
“Conditions if damage has occurred”.) In other cases, the latest edition
of the “General conditions for the supply of goods and services” issued
by the ZVEI (German Central Association for the Electrotechnical
Industry) shall apply.
Before disposing of the packaging, please check it for loose functional
parts and information leaflets.
So that we can process warranty claims, please give an exact
description of the defect (with a photograph, if appropriate) and state
the model designation of the unit.
Please keep these operating instructions at the place where the
equipment is used.
2 General instructions
Work on the electrical devices and switching equipment may only be
carried out by appropriately qualified personnel. The relevant safety
and environmental regulations must be followed.
FLICA equipment is free from PCBs, PCTs, asbestos, formaldehyde,
cadmium and water-repelling substances.
The design of the equipment has taken into account the Standards EN
50081-1,2 (emitted interference), EN 50082-1 (immunity to
interference), EN 60335-1 (electrical safety),
IEC 695-2-1 to -2-3 (fire resistance, glow-wire test).
Safety tests have been performed in the factory on all equipment in
accordance with EN 60335-1
(DIN VDE 0700 T500).
3 Use and Function
3.1 Use for the purpose intended
¼ This controller is designed to control ambient and media
temperatures in cold stores and refrigeration systems and to
control existing defrost equipment for one refrigeration circuit in
each case.