Heath Zenith Multi-Channel Remote Control - Manual (Page 2)

2 598-1145-01
SEtuP ExaMPLE – SEt uP RECEIvERS
Following is one example of how the Lighting Control Panel can be programmed to operate multiple light sources within a home.
The Control Panel has two “Groups” (A and B) with up to eight lighting controls in each group. In this example, the eight controls within
Group A will operate the following light sources: Family Room (3), Kitchen, Front Porch, Rear Porch, Garage, and Foyer.
Set code switch 4 on receivers to Group A setting (down) for all
receivers to operate in Group A.
Set code switches 1 through 3 on receivers to match the cor-
responding control setting in above example.
To Operate:
1. Press Group A button (Note: Group A LED will be ON).
2. Press corresponding control button for desired action of selected
light source.
To set receivers to work with Group B controls, slide code switch
4 to Group B (up) on receivers and set code switches 1 through
3 as shown above.
Possible Light Sources for Group B:
• Bedroom #1 (Wall Switch)
• Bedroom #2 (Wall Switch)
• Master Bedroom (Wall Switch)
• Master Bedroom Lamp #1 (Plug-In)
• Master Bedroom Lamp #2 (Plug-In)
• Master Bath (Wall Switch)
• Closet (Lamp Socket Converter)
• Hall Ceiling Light (Wall Switch)
ON
ALL ON ALL OFF
DIM
PANIC
A B
OFF
ON
1 2 3
4
Note: The “X” has been placed on the switches to
help clarify the code settings on this page.
Code Selection
Switches
Group Selection Switch
(Group A Shown)
Light: Family Room Lamp #3
Receiver: Wall Receptacle
Receptacle Code Setting:
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
Group A Settings Group B Settings
Light: Kitchen
Receiver: Wall Switch
Wall Switch Code Setting:
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
Group A Settings Group B Settings
Light: Family Room Lamp #1 and #2
Receiver: Plug-In (1 per lamp)
Plug-In Code Setting:
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
Group A Settings Group B Settings
Light: Front Porch
Receiver: Wall Switch
Wall Switch Code Setting:
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
Group A Settings Group B Settings
Light: Family Room Ceiling Light
Receiver: Wall Switch
Wall Switch Code Setting:
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
Group A Settings Group B Settings
Light: Garage
Receiver: Lamp Socket
Lamp Socket Code Setting:
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
Group A Settings Group B Settings
Light: Rear Porch
Receiver: Floodlight
Floodlight Code Setting:
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
Group A Settings Group B Settings
Light: Foyer
Receiver: Wall Switch
Wall Switch Code Setting:
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
Group A Settings Group B Settings
Note: Label containing code information is located under
control identification card for user convenience.