English, Specifications, Troubleshooting guide – Heath Zenith Multi-Channel Remote Control User Manual

Page 3: Regulatory information, Technical service

Advertising
background image

3

598-1145-01

ENGLISH

SPECIFICatIoNS

Range ....................................................................................................................................................................Up to 100 feet (30.5 m)
Rated Voltage (2-AAA Batteries) .................................................................................................................................................... 3 VDC
Frequency .................................................................................................................................................................................... 315 MHz

PoSSIBLE CauSE

1. Batteries installed incorrectly.

2. Batteries are dead.

1. Dip switch settings on receiver do not

match controller.

2. Wrong group or channel is selected.

3. Signals from controller are being

blocked, or transmitter is out of range.

4. Batteries are weak.

tRouBLESHootING GuIdE

SyMPtoM

Remote control does not come on.

Remote control will not operate receiver.

SoLutIoN

1. Install batteries according to polarity

markings inside remote control.

2. Replace batteries.

1. Check dip switch settings on receiver.

2. Verify correct group and channel are

selected.

3. Check for metal objects that could block

the signal, or reposition the transmitter
and/or receiver.

4. Replace batteries.

REGuLatoRy INFoRMatIoN

This device complies with Part 15 of the FCC Rules and RSS-210 of Industry Canada. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference
that may cause undesired operation.
The user is cautioned that changes or modifications not expressly approved by the party responsible for regulatory compliance could
void the user’s authority to operate the equipment.

tECHNICaL SERvICE

Please call 1-800-858-8501 (English speaking only) for assistance before returning product to store.

If you experience a problem, follow this guide. You may also want to visit our Web site at:

www.hzsupport.com. If the problem persists,

call* for assistance at

1-800-858-8501, 7:30 AM to 4:30 PM CST (M-F). You may also write* to:

HeathCo LLC
P.O. Box 90004, Bowling Green, KY 42102-9004
ATTN: Technical Service
* If contacting Technical Service, please have the following information available: Model Number, Date of Purchase, and Place of
Purchase.

No Service Parts available for this Product

Advertising