Harbor Freight Tools 94057 - Manual (Page 6)

Page 6 For technical questions, please call 1-800-444-3353. Item 60333 94057
Expert Loading Directions
Only for individuals certified by the ASI (ATV Safety Institute)
By using directions in this section, you are agreeing that you are an ASI trained, certified rider
and that you understand that your safety in performing this procedure is
based on your ability to control the vehicle.
1. Have an assistant monitor the Ramp
tongues for slippage on the tailgate.
2. Confirm that the weight of the ATV
and rider combined is still less than
the 1200 lb. capacity of this Ramp.
3. While wearing a safety helmet,
drive your ATV onto Ramp at less than
1 mile per hour using the lowest gear
possible. Drive up at a slow, steady
speed while leaning forward on the
front pegs to keep proper balance.
Avoid bouncing or jerking, because
they will increase stress on the Ramp.
WARNING! Be sure the 4-wheeled
ATV is centered on Ramp.
4. Once the ATV is in truck bed,
set its brake & securely tie it down.
Remove the Ramp and secure them
with the Safety Chains and Hooks.
CAUTION: Contact between the tongue
of the Ramp and the tailgate may result
in damage to the vehicle’s finish.
WARNING! WHENEVER possible,
use a winch (not included) to load the ATV.
This is the safest way to load an ATV.