Hand Held Products Hand Held Computer Dolphin 7450 - Manual (Page 46)

5 - 2
Configuring The Dolphin 7400/7450 RF Terminal
When you cold-boot the Dolphin 7400/7450 RF terminal, the red LED comes on and the green LED blinks, and after
approximately 3 seconds, the welcome screen shown below will appear.
Press <Enter> and you will be prompted to calibrate the screen and set the time and date. Refer to the section on Calibrating the
Screen, Setting the Date/Time
in Chapter 2 for additional information. After the date and time are set, the Dolphin demos and
Cisco radio drivers self-install and the main menu for the HHP demos displays.
Client Utilities for the Cisco DSSS 802.11b Radio
The following utilities are available for configuring the Cisco 802.11b radio:
Client Utility (ACU) - Configures the radio for use in a wireless network
Wireless Login Module (WLM) - Provides login interface to Radius server if using LEAP
This document covers the basics of the Client Utility (ACU). For more detailed information on these and the other utilities, please
refer to the document entitled “Using the Client Utilities for Windows CE” included on the Dolphin Documentation CD.