Holux GR-213 - Manual (Page 13)

HOLUX
13
43 Latvia – S-42 (Pulkovo 1942) Krassovsky 1940 Data67.dat
44 Liberia – 1964 Clarke 1880 Data36.dat
45 Mexico, central America GRS1980 Data38.dat
46 OMAN Clarke 1880 Data39.dat
47 Pakistan Everest 1830 Data40.dat
48 Paraguay - South American 1969 South American 1969 Data42.dat
49 Peru1 – South American 1969 South American 1969 Data41.dat
50 Philippines Clarke 1866 Data43.dat
51 Poland – S-42 (Pulkovo 1942) Krassovsky 1940 Data68.dat
52 Potsdam Bessel 1841 Data71.dat
53 Puerto Rico – Virgin Islands Clarke 1866 Data44.dat
54 Qatar national International Data45.dat
55 Qornoq – Greenland (SOUTH) International Data46.dat
56 Regional Mean South American 1969 Data48.dat
57 Reunion – Mascarene Islands International Data47.dat
58 Romania – S-42 (Pulkovo 1942) Krassovsky 1940 Data69.dat
59 Rome 1940 – Italy International Data49.dat
60 Saudi Arabia – Ain el Abd 1970 International Data50.dat
61 Singapore Modified Fischer 1960 Data51.dat
62 South Africa Clarke 1880 Data52.dat
63 Thailand 1975 Everest 1830 Data54.dat
64 Tokyo_Japan Bessel 1841 Data60.dat
65 Tokyo_Korea Bessel 1841 Data61.dat
66 Tokyo_Mean Bessel 1841 Data59.dat
67 Tokyo_Okinawa Bessel 1841 Data62.dat
68 Trinidad, Tobago South American 1969 Data55.dat
69 Venezuela South American 1969 Data57.dat
70 Venezuela – Provisional American 1956 International Data56.dat
71 WGS84 WGS84 Data58.dat
6.2 Setting Syntax
6.2.1 Manufacturing Default:
Datum: WGS84.
Baud Rate: 4800.
Output: GGA, GSA, GSV, RMC.
6.2.2 Datum change syntax:
>DOS\Sirfprog /Fdataxx.dat –Px –Bx –Csh1
-Px: x is com port, 1= COM1, 2 = COM2
-Bx: Baud rate, 4800, 9600, 19200 or 38400
Example:
Change Datum to WGS84,
Sirfprog /Fdata58.dat –P1 –B4800 –Csh1 <Entry>
After changing datum, the new datum will be kept in SRAM. If no power supplied to GR-213 for more
than 30 days, user must re-set datum when power on.