Home Theater Direct RTD209 - Manual (Page 31)

Illustrations contained in this document are for representation only.
Additional Information
29
EN
Troubleshooting (mp3 Player)
The player does not turn on when PLAY button pressed.
• Battery may be inserted incorrectly.
•
Battery may be empty.
Skipping tracks or bad sound quality?
• Repeat or random function may be activated.
• There may be strong magnetic fields (e.g. too close to TV) near the unit.
• Low Battery level. Replace with new one.
Cannot perform playback?
• LOCK function may be activated.
• There may be no mp3 tracks in the card or internal memory.
• Memory Card may be damaged.
Cannot playback tracks on the player
• Make sure audio tracks are encoded in the mp3 or Windows Media formats at supported
bitrates.Bitrates support by the player: mp3 – 32 to 320 kbps
• WMA files may be DRM protected and you don’t have the proper rights (license) to play the
files.
Check the website and/or application help system of the music download service provider from
where the content was purchased from for license acquisition details.
For more information on how license acquisition works, go to
www.microsoft.com/windowsmedia/drm.
USB display does not appear when connected to computer.
• Check connection between your unit and the computer.
The player does not respond to key operations?
• To reset the unit, turn the player off by removing the battery. Reinsert the battery properly and
turn the player on again to resume normal operations.
The player does not work after reformat.
• Format the player in FAT or FAT32 format. The player does not work in NTFS format.
Note:
This unit may temporarily cease to function if subjected to electrostatic disturbance. To resume normal operation, it may
be necessary to cycle the power off and back on or to remove and reinstall the batteries.
RTD209 EN 26/4/06 3:21 PM Page 33