Hitachi WirelessIP 5000 - Manual (Page 87)

- 6-8 -
Chapter 6
Other settings
Ringer/vibrator
Setting the ringer/vibration type. You can switch the ringer/ mode/ LED according to the incoming telephone number.
1 From the settings menu,
Select "1. Bell/Vib." using the keys of the key,
then press the key.
2 You can set the mode separately for internal lines and external lines.
You can make two settings for internal lines and two for external lines.
Select setting using the keys of the key,
then press the key.
3 Displays configuration information.
・ Ring Type
・ Mode
・ LED
To change a setting, from the detailed information display screen, press the
key,
select "Edit", and select the value.
There are 16 ring types.(Bell 1 ～ Bell16）
There are four modes.
Ringing Vibration Ring+Vib LED
Ringer Yes × Yes ×
Vibrator × Yes Yes ×
There are three LEDs.{RED, BLUE, Off）
Finally, save with the key.