Honeywell EXPANDAPAC F35F - Manual (Page 3)

F35F Expandapac™ MEDIA AIR CLEANER
68-0178—2 3
SPECIFICATIONS
IMPORTANT
The specifications in this publication do not include
normal manufacturing tolerances; therefore, an
individual unit may not exactly match the listed
specifications. This product is tested and calibrated
under closely controlled conditions, and some minor
differences in performance can be expected if those
conditions are changed.
Model:
F35F Expandapac Media Air Cleaner includes cabinet,
access door, Expandapac media filter, filter frame, and
combs.
Application:
Use with gas, oil, and electric forced warm air furnaces and
with compressor cooling. Can be used with heat pumps if
filter is changed regularly to prevent excessive pressure drop.
Arrestance Efficiency:
Efficiency ratings are based on National Bureau of Standards
Dust Spot Method using atmospheric dust and American
Society of Heating, Refrigerating and Air-Conditioning
Engineers Standard 52.1-92.
—Initial Atmospheric Dust Spot Efficiency: 25.8%
—Average Atmospheric Dust Spot Efficiency: 32.0%
—Average Synthetic Dust Weight Arrestance: 92.0%
—ASHRAE Dust Holding Capacity: 55g
The above data is for a 16 x 25 in. filter.
The F35F removes particles as small as 1.0 microns.
Dimensions:
Fig. 1. Installation dimensions in in. (mm) of air cleaner.
Filter Media:
Expandapac.
Temperature Rating:
-40
° F to +125 ° F (-40 ° C to +52 ° C).
Capacity and Pressure Drop:
400 600 800 1000 1200 1400 1600 1800 2000
0.00
0.05
0.10
0.15
0.20
0.25
0.30
F35 FILTER PRESSURE DROP VS AIR FLOW RATE
PRESSURE DROP (IN. WC)
AIRFLOW (cfm)
M12002-A
1
1
2
WHEN FIRST INSTALLED. PRESSURE DORP INCREASES AS
FILTER BECOMES LOADED. FILTER SHOULD BE REPLACED
WHEN PRESSURE DROP REACHES 0.5 IN. WC (0.1 kPa).
MAXIMUM CAPACITY BASED ON 500 fpm FACE VELOCITY.
2
20" X 25"
16" X 25"
AND 20" X 20"
Fig. 2. Capacity pressure drop of
F35 Expandapac Media Filter.
M6931
F35 SIZE
IN.
16 X 25
20 X 25
20 X 20
MM
406 X 635
508 X 635
508 X 508
DIM A
14 7/16
18 7/16
18 7/16
367
468
468
DIM B
16 3/16
20 3/16
20 3/16
411
513
513
23 1/4
23 1/4
18 1/4
DIM C
591
591
457
DIM D
25 1/2
25 1/2
20 1/2
648
648
521
DIM C (SEE TABLE)
DIM D (SEE TABLE)
DIM B
(SEE TABLE) DIM A
(SEE TABLE)
1-1/8 (29)
7/8 (22)
5/8
(16)
6-3/4 (171) 7/8 (22)
IN. MM IN. MM IN. MM IN. MM