Heath Zenith 6280 - Manual (Page 2)

-2- 595-5506-09
Use either screws or double sided tape to mount
push button.
To mount with screws, remove back of case by
pushing in tab on bottom with a small screwdriver.
Attach back of case to door jamb or wall. Snap
front of push button on.
When attaching push button using double sided
tape, make sure the surface of the door jamb or
wall is clean.
Case Style "A": Chime can be mounted by us-
ing 3 holes in the back of case, or by using 2
screws with keyholes.
Case Style "B": Chime can be mounted by us-
ing 1 large screw (provided) with saw-tooth
hanger. Securely fasten saw-tooth hanger to rear
of case using screws (or nails) provided (see il-
lustration on page 1). It can also be placed on a
flat surface.
Keyholes
Case Style "A"
Back
2 11 ⁄
16
"
2
1 /
2 "
5.
Slide chime cover onto top of chime. Use technique for the style case
you have. Mounting groove in cover will align with mounting tab(s) on base.
4.
Mount push button and chime.
Holes