Connecting to the network, Installing a server blade – HP BL260c User Manual
Page 14
Setup 14
For detailed port mapping information, see the HP BladeSystem enclosure installation poster or the
HP BladeSystem enclosure setup and installation guide on the HP website
Connecting to the network
To connect the HP BladeSystem to a network, each enclosure must be configured with network
interconnect devices to manage signals between the server blades and the external network.
Two types of interconnect modules are available for HP BladeSystem c-Class enclosures: Pass-thru modules
and switch modules. For more information about interconnect module options, see the HP website
Installing a server blade
CAUTION:
To prevent improper cooling and thermal damage, do not operate the enclosure
unless all bays are populated with a component or a blank.
1.
Remove the device bay blank.