Hisense Group TC14FS68 - Manual (Page 13)

Using the TV features
-11-
The item allows you to add or delete a channel.
Press
VOL+ or VOL- to select Add or Delete.
If
some channel is set to Delete, the channel will be skipped when
you select a channel by pressing
CH+ and CH-.
The item allows you to select the signal receiving method.
change the item between
Air and Cable.
Press
VOL+ or VOL- to
Changing channels
To change the channel, you can
1.Press
CH +or CH- on the remote control or
on the TV.
2.Press the channel number buttons(0-9).
1) To select a one-digit channel : Press the 0 button to display 0- and then press a button from 1-9.
2) To select a two-digit channel : Press a button from 1-9 to select the first number, then press a button
from 0-9 again to select the second number. For example, to select channel 28, press the 2 button first ,
2- will appear on the screen, and then press the 8 button.
3) To select a three-digit channel: Press the 1 button for about one second until 1-- appears on the screen, then
press buttons from 0-9 successively to select the other two numbers. For example, to select channel 120,
press the button 1 for one second , 1-- will appear on the screen, then press the button 2 and the button 0
successively.
CH
Note:
1)When the search is finished, the screen will display as left shown below and the TV will automatically turn to the
first channel that has a program. Otherwise the screen will display as right shown below.
2) The
PRESET menu will not appear when the TV is in AV status.
3) Press the
VOL+ or VOL- to stop the auto-search if you want.
Search finished
Please watch Nothing searched
Check antenna
Press
VOL+ and VOL- or the channel number buttons to select the channel that you wish.