Т³гж 19, Using the tv features, Appendix – Hisense Group TC14FS68 User Manual
Page 19: Displaying the current channel number on screen, Switching between two channels, Setting the child lock, Selecting the signal source, Cleaning and care
Displaying the current channel number on screen
Press the
DISPLAY button on the remote control, the current channel number will display on the top-right
corner of the screen. Whenever you want to cancel it, press the
DISPLAY button again.
Switching between two channels
Press the RECALL button on the remote control to return to the previous channel that you have just viewed.
Press the RECALL button repeatedly,
alternate between the present and previous channels.
the screen will
Setting the child lock
Press the
LOCK button to
unlock
lock or
the TV.
When the TV is locked, the screen will turn to blue background, and nothing can be viewed unless you press
LOCK again to unlock it.
Selecting the signal source
Press the
TV/AV button to select TV or AV mode.
Using the TV features
-17-
Note:
1) If you have set the sleep timer, the Off-time (See Using the CLOCK menu) you set will be cleared
automatically.
2) If you have set the On-time (See Using the CLOCK menu), when the preset time comes to turn on the TV,
the sleep timer will be set to 120 minutes automatically. It will be cancelled automatically when you execute
any operation with the TV(This feature is just for nobody being at home, however the TV turns on
automatically).
Appendix
Cleaning and care
WARNING: TV sets use high voltage. Do not try to remove the cabinet back. Refer servicing to qualified
service technicians.
To clean the TV screen:
1) Unplug the TV to avoid possible shock hazard.
2) Use a clean cellulose sponge or chamois cloth dampened with a solution of mild detergent and warm
water to clean the TV screen and trim. Do not use too much water because water spills into the cabinet
can cause damage to the TV.
3) Wipe off any excess moisture with a clean dry cloth.
4)Polish the cabinet with a quality furniture polish to maintain the finish and appearance of the cabinet.
Caution: Never use strong solvents such as thinner, benzene, or other chemicals on or near the cabinet.
These chemicals can damage the finish of the cabinet.