Hanns.G HG281 - Manual (Page 15)

User’s Manual
HOW TO ADJUST A SETTINGS
BRIGHTNESS/CONTRAST
BRIGHTNESS
Adjust the brightness value of the display according to your
preference. Select BRIGHTNESS option to adjust the
brightness value.
CONTRAST
Adjust the contrast value of the display according to your
preference. Select CONTRAST option to adjust the contrast
value.
X-CONTRAST
Optimal setting for high contrast images or videos. The dark and
light areas of the image are automatically detected, and the
contrast is enhanced to provide a clearer, sharper image. Also,
you may select the X-CONTRAST option.
INPUT SETTING
INPUT SETTING
Select the INPUT SETTING option to change between analog
(VGA) or Digital (HDMI) source. Enter the option and select
Analog or Digital.
[Dual input mode optional]
AUTO SEARCH
From the Signal Selection menu, select the AUTO SEARCH
option to activate or deactivate the automatic signal search
function.
COLOR SETTING
WARM
NATURE
COOL
Adjust the color temperature value of the display according to
your preference: WARM /NATURE/ COOL.
USER
Move the cursor to the User option and select it,
To adjust the red, enter the R option and adjust the level.
To adjust the green, enter the G option and adjust the level.
To adjust the blue, enter the B option and adjust the level.
IMAGE SETTING
AUTO ADJUST
The auto adjustment function is used to optimize the horizontal
position ,
vertical position , clock ,and phase . [For
VGA Input only]
ASPECT RATIO
When the aspect ratio of screen is distorted, you may make
adjustments by using this function. “FULL” indicates full screen
display, which does not ensure the image is shown as is or in
initial scale. “FIT” indicates scaling by the proportion of original
images, which may cause the screen showing black bands.
[The
availability of this function depends upon the selected model]
15