Hanns.G HG281 - Manual (Page 17)

User’s Manual
SYSTEM
AUDIO INPUT
While transferring via the HDMI port, it is recommended to set
AUDIO INPUT to HDMI; if no sound is outputted, it is
recommended to select AUDIO INPUT as PC, and make sure the
PC audio output cable is connected to monitor’s LINE IN (or
AUDIO IN) port.
[For HDMI Input only]
VOLUME
Select the VOLUME option to change the volume level. Enter
the option and adjust the level.
MUTE Select the MUTE option to switch the function On or Off.
DDC/CI
Select the DDC/CI option to switch the function On or Off.
[Dual input mode optional]
FACTORY RESET
Select the FACTORY RESET option to reset to the monitor’s
default setting. This will erase the current settings. Enter the
option and select On or Off.
INFORMATION
Display Horizontal frequency/Vertical frequency/Resolution
information.
17