Havis-Shields KK-K9-D22-K - Manual (Page 11)

KK-K9-D22-K_INST_9-07
13. Front Lower Aluminum Fillers:
• Attach as shown using (3) ¼-20 x ¾” carriage
bolts and serrated nuts.
• Close door to position, then tighten.
14. Front Upper Lexan Fillers:
• Close door to position.
• Drill ¼” holes through lexan and cage.
• Attach using (3) ¼-20 x ¾” carriage bolts and
serrated nuts.
• Tighten all hardware.
15. Silicone:
• All gaps and seams must be sealed.
16. Rubber matting:
• After silicone is dry, place rubber matting.
17. Dome Light Switch Box:
• The switch box location can be at the
customer’s discretion.
• Mounting on driver’s side of the vehicle in
upper left corner is recommended.
Final Hinging Widow
Guard Installation
Note: Product is painted black for Demo purposes only. Product is shipped unpainted
Switch Box
Front Filler
panel
installation