Havis-Shields KK-K9-D22-K - Manual (Page 8)

KK-K9-D22-K_INST_9-07
7. Rear Lower Fillers
• Position and attach to rear cage using #10 x ¾” Stainless sheet metal screws.
• Filler lines up with bend on rear cage,
• Attach to step trim using #10 x ¾” Stainless sheet metal screws.
Note: apply pressure to filler panels while installing, in order to get a clean tight fit.
8. Rear Upper Fillers:
• Applying pressure to rear upper filler panel, tight to rear cage ceiling and
bottom trim, mark and pre-drill mounting holes
• Attach to cage using #10 x ¾” Stainless sheet metal screws.
9. Ceiling Fillers
• Position ceiling filler to fill gap between ceiling of K-9 unit and vehicles headliner.
• Mark, pre-drill and attach using #10 x ½” Stainless sheet metal screws.
Rear Lower filler
Rear Upper
Filler
Ceiling filler