Some – HP 2570 User Manual

Page 112

Advertising
background image

4.

Verify that the USB cable is set up properly as follows:

Unplug the USB cable and plug it in again.

Do not attach the USB cable to a keyboard or non-powered hub.

Verify that the USB cable is 3 meters or less in length.

If you have several USB devices attached to your computer, you might
want to unplug the other devices during the installation.

5.

Continue with the installation and restart the computer when prompted.

6.

If the essential icons do not appear, remove the software and then reinstall it.
For more information, see

Uninstall and reinstall the software

.

7.

If you are using a Windows computer, open the

HP Solution Center

and

check for the essential icons (

Scan Picture

and

Scan Document

). If the

essential icons do not appear, remove the software and then reinstall it. For
more information, see

Uninstall and reinstall the software

.

I received a message that an unknown error has occurred

Solution

Try to continue with the installation. If that doesn’t work, stop and

then restart the installation, and follow the directions on the screen. If an error
occurs, you might need to uninstall and then reinstall the software. Do not simply
delete the HP All-in-One program files from your computer. Make sure to remove
them properly using the uninstall utility provided when you installed the

HP Image

Zone

software.

For more information, see

Uninstall and reinstall the software

.

Some of the buttons are missing in the

HP Solution Center

(Windows)

If the essential icons (

Scan Picture

and

Scan Document

) do not appear, your

installation might not be complete.

Solution

If your installation is incomplete, you might need to uninstall and then

reinstall the software. Do not simply delete the HP All-in-One program files from
your hard drive. Make sure to remove them properly using the uninstall utility
provided in the HP All-in-One program group. For more information, see

Uninstall

and reinstall the software

.

The registration screen does not appear

Solution

➔ In Windows, you can access the registration screen from the Windows

taskbar by clicking Start, pointing to

Programs

or

All Programs

(XP),

Hewlett-Packard

,

HP Photosmart 2570 All-in-One series

, and then

clicking

Sign up now

.

User Guide

109

Troubleshooting

Advertising
This manual is related to the following products: