HP R707 User Manual
Page 114
114
HP Photosmart R707 User’s Manual
3
Open the rubber door on the side of the camera and
connect the small end of the USB cable to the USB connector
on the camera.
4
When the camera is connected to
the printer, a
Print Setup
menu
displays on the camera. If you
already selected images to print
using the camera
button,
the number of images selected is
shown. Otherwise,
Images: ALL
is
displayed. To select or change the selections of images to
print, press the
button, scroll through the images using
the
buttons, then use the
buttons to adjust the
number of copies for each image. When satisfied with your
selections, press the
button again to return to the
Print Setup
menu.
5
If all the settings in the
Print Setup
menu look correct, press
Menu/OK
on the camera to begin printing. Or, you can
change settings in the
Print Setup
menu using the arrow keys
on the camera, then follow instructions on the screen to
begin printing.
NOTE
There is a print preview in the lower right-hand corner
of the
Print Setup
screen showing the page layout that will
be used for printing images. This print preview updates as
you change the settings for the
Print Size
and
Paper Size
.