HP R707 - Manual (Page 42)

42 HP Photosmart R707 User’s Manual
2 Press Zoom In again and hold it
until you reach the desired size in
the Image Display. A yellow frame
surrounds the area of the image
that will be captured. The
resolution number on the right side
of the screen also becomes smaller
as you digitally zoom. For example, 4.2MP appears in
place of 5MP , indicating that the image is being reduced to
a size of 4.2 Megapixels.
3 When the yellow frame is at the desired size, press the
Shutter button to take the picture.
To turn digital zoom off and return to optical zoom, press Zoom
Out on the Zoom lever until digital zooming stops. Release
Zoom Out , and then press it again.
NOTE Digital zoom reduces the resolution of an image, so
your picture will tend to be more pixilated than the same
image taken with optical zoom. If you just intend to e-mail
an image or post it to a website, this loss of resolution will
not be noticeable, but in situations where the highest
quality counts (such as printing), limit the use of digital
zoom. It is also recommended to use a tripod when using
digital zoom.