Harbor Freight Tools 92156 User Manual

Page 4

Advertising
background image

SKU 92156 For technical questions, please call 1-800-444-3353. Page 4

12.

Avoid accidental starting. Be sure the Power Switch is off before plugging
in.
Carrying power tools with your finger on the Power Switch, or plugging in
power tools with the Power Switch on, invites accidents.

13.

Do not overreach. Keep proper footing and balance at all times. Proper
footing and balance enables better control of the power tool in unexpected
situations.

14.

Use safety equipment. Always wear eye protection. Dust mask, nonskid
safety shoes, hard hat, or hearing protection must be used for appropriate
conditions.

REEL USE AND CARE

15.

Use the correct cord for your application. The correct cord will do the job
better and safer at the rate for which it is designed. NEVER exceed the maxi-
mum amperage (5 A), or voltage (125 VAC) from the receptacle.

16.

Do not use the power lamp if the Power Switch does not turn it on or off.
Any product that cannot be controlled with the Power Switch is dangerous and
must be replaced.

17.

Disconnect the Power Cord Plug from the power source before making any
adjustments, changing accessories, or installing this cord reel.

18.

Store idle tools out of reach of children and other untrained persons. Tools
are dangerous in the hands of untrained users.

19.

Maintain tools with care. Do not use a damaged product. Tag damaged prod-
ucts “Do not use” until repaired.

20.

Before use, check for misalignment or binding of moving parts, breakage of
parts, insecure mounting, and any other condition that may affect the reel’s
operation. If damaged, have the reel serviced before using.
Many accidents
are caused by poorly maintained products.

21.

Use only accessories that are recommended by the manufacturer for your
model.
Accessories that may be suitable for one tool may become hazardous
when used on another tool.

SERVICE

22.

Reel service must be performed only by qualified repair personnel. Service
or maintenance performed by unqualified personnel could result in a risk of injury.

Advertising