Harbor Freight Tools 92156 User Manual
Page 5
SKU 92156 For technical questions, please call 1-800-444-3353. Page 5
23.
When servicing a reel, use only identical replacement parts. Follow
instructions in the
“Inspection, Maintenance, And Cleaning”
section of this
manual. Use of unauthorized parts or failure to follow maintenance instructions
may create a risk of electric shock or injury.
SPECIFIC SAFETY RULES
1.
Maintain labels and nameplates on the Cord Reel Work Light. These carry
important information. If unreadable or missing, contact Harbor Freight Tools for
a replacement.
2.
Always wear ANSI approved safety impact eye goggles when installing the
Cord Reel Work Light. Using personal safety devices reduce the risk for injury.
Safety impact eye goggles are available from Harbor Freight Tools.
3.
Risk of fire. Never install a bulb that uses more than 13 watts or install a differ-
ent type of bulb.
4.
Keep the Cord Reel Work Light dry. Never immerse the light or Cord Reel in
liquid.
5.
Always unplug the Cord Reel from its electrical outlet and allow it to cool
completely before performing any inspection, maintenance, or cleaning
procedures.
6.
The Cord Reel must be properly installed before connecting to the power
supply.
7.
Check for frayed or broken wires before each use.
8.
When pulling cord from the Cord Reel, always grasp the cord itself, and not
the device or tool the cord is plugged into.
9.
If mounted in an area that is not readily accessible, only connect this Cord
Reel to a switch-controlled outlet; then, if a malfunction occurs, the Reel
can be disconnected immediately.