Unpacking, Assembly instructions – Harbor Freight Tools ELECTRONIC BORE GAUGE 94873 User Manual
Page 3
Page 3
SKU 94873
for technical questions, please call 1-800-444-3353.
unpacKing
When unpacking, check to make sure that the item is intact and undamaged. If any
parts are missing or broken, please call Harbor Freight Tools at the number shown on the
cover of this manual as soon as possible.
assEMbly instructions
note: For additional information regarding the parts listed in the following pages, refer to
the Assembly Diagram near the end of this manual.
figure 2a
4
figure 2b
5
3
Attach the Display (5) into the Grip (3). The face of the Display (5) turns 360°.
1.
Lock the Display (5) in place with the Locking Screw (4).
2.
(see figure 2a).
Select the Anvil, or combination of an Anvil (7) and Washers (8), as needed and
3.
install on Head (1).
(see figure 2b)
Tighten the Anvil Locking Nut (6) snugly.
4.
(see figure 2b)
note: Do not over tighten the Anvil Locking Nut (6).