Hearth and Home Technologies 7100 - Manual (Page 21)

17
Clock / Timer
NOTE: Clock must be set or your timer will not function!
Functions:
Power on
Display is flashing
Set time of day
Press left button" ". Set time of day with " " and
" " buttons. This function remains activated for 7
seconds after the last " " / " " operation!
Set minute minder
This function is permanently activated and can be immediately
set with " " and " " buttons.
During setting, the units are 10 seconds.
During count down the minute minder has priority in the
display. The units are seconds.
The maximum time is 99 minutes.
Bell symbol indicates minute
minder in operation
Minute minder
Adjust setting up
Adjust setting down
Reset minute minder
Press " " and " " button together and release
" " button first.
Signal
The signal after time out will stay on 7 minutes if
it is not been reset with the " " button (Only one
touch.)
Signal Sound
The sound of the signal can be changed if desired.
When the display show time-of-day, the signal
frequency can be selected by pressing the " "
button.
Three different frequencies are selectable.