Heath Zenith Wireless Push Button Accessory SL-6290 Series - Manual (Page 4)

-4- 595-5507-11
Tune Settings
Your Heath ® /Zenith wireless chime has different selectable tunes:
Ding (one note), Ding-Dong (two note), or Westminster (eight
note) (Available on selected Heath
® /Zenith chimes). The factory
setting is for the Ding-Dong tune (or Westminster, when available).
This tune can be changed by following the instructions below.
•
Ding (one note tune)
Push button: Add a jumper to location 8.
•
Ding-Dong (two note tune)
Push button: Remove jumper from location 8.
Chime: Remove jumper from location 8.
•
Westminster (Eight note tune) (Available on selected Heath ® /
Zenith chimes)
Push button: Remove jumper from location 8.
Chime: Add a jumper to location 8.
Note: All models have both front and back door tune capabilities.
You may purchase any Heath
® /Zenith wireless push button for a
second entrance. We recommend the back door use the Ding tune
and the front door use the Ding-Dong tune (or Westminster tune,
available on selected Heath ® /Zenith chimes). Models that include
two push buttons will come factory set for front and back doors.
Decals on the rear of the push button will indicate its setting.