Optimizing focus, For the normal focus range, For the macro focus range – HP R725 User Manual

Page 13: Using focus lock

Advertising
background image

When you press the Shutter button halfway down, the
camera focuses from the closest distance, then
examines other focus regions, displaying those in focus
as green brackets. The sample image shows focus in
regions one, two, and five.
If the camera keeps focusing on something other than
your subject, set Auto Focus Area to Spot (see Auto
Focus Area
under

Using the Capture Menu

on page 18

), then use Focus Lock (see

Using

Focus Lock on page 13

).

Optimizing focus

When the camera cannot auto focus, the focus brackets turn red. This indicates the
picture may be out of focus because the subject is out of the focus range or the scene
has low contrast.

For the Normal Focus range
If the camera is set to Normal Focus (see

Using the focus range settings

on page 14

) and cannot focus, it will still take the picture. Try releasing the Shutter

button, reframing, and then pressing the Shutter button halfway down again. If the focus
brackets are still red:

If the scene has low contrast, use Focus Lock (see

Using Focus Lock

on page 13

) and aim at a point on the subject that has more colors or crisp edges.

If the subject is too close (less than 500 mm or 20 in), move farther away from the
subject or use the Macro or

Auto Macro focus range (see

Using the focus

range settings on page 14

).

For the Macro focus range
If the camera is set to Macro and cannot focus, the camera will not take the picture.
Try one of the following:

Move within the Macro range or set the camera to

Auto Macro or

Normal

Focus (see

Using the focus range settings on page 14

).

In low contrast scenes, use Focus Lock (see

Using Focus Lock on page 13

).

Using Focus Lock

Use Focus Lock to focus on a subject that is not in the center of the picture, to capture
action shots more quickly by pre-focusing in the area where the action will occur, or to
focus in low light or low contrast situations.
1.

Frame the subject for your picture within the focus
brackets. In low light or low contrast situations,
frame a brighter or higher contrast object.

2.

Press the Shutter button halfway down.

HP Photosmart R725/R727 Digital Camera

13

Advertising