Hitachi VT-FX601A - Manual (Page 13)

PREPARATION FOR USE - 13 -
SETTING A VIDEO CHANNEL
If your TV does not have A/V terminals;
When the VCR is in the Playback mode or when the VCR is in the VCR position, your
TV will receive the signals from the VCR on either channel 3 or 4.
To use the VCR with your TV, set the selector switch to CH3 or CH4, whichever is not
used or least used for normal broadcasts in your area. Then set your TV to that same
channel.
CONNECTING TO INPUT JACKS
When you copy a video tape, or watch a program recorded on an another source, use
audio/video input jacks.
INPUT SELECT
To use the external input jacks, select the AUX position. Press the CHANNEL or
button or enter "00" with number button on the remote control so that "AUX" appears on
the screen.
Note: "AUX" is found before the lowest memorized channel. (Example: CH2)