Honeywell HW-400C Series - Manual (Page 4)

OPERATION
• Plug the power cord into a 120 Volt AC wall
outlet.
• To turn fan on, press the ON/SPEED/OFF
button one time. You will see either an “F”
or “C” flash quickly indicating Fahrenheit
or Celsius.
• When fan is on, it will start in High speed.
Press button again while on High speed and
fan will switch to Medium. While on Medium, press “SPEED” button and fan
will switch to Low speed.
• You will see a red light illuminated on the control panel of the fan showing you
what speed your fan is on.
• Select either Intake ( ) for fresh air or Exhaust ( ) to remove stale air
from the room. A red light will illuminate on the mode selected.
• To turn the fan off, press the ON/SPEED/OFF through the speed cycles.
NOTE: Once your fan is “OFF”, the next time you turn it on, it will automatically
default to HIGH speed. You can then adjust the speed as desired.
THERMOSTAT OPERATION
This fan has an LED display indicating the desired room temperature setting.
Pressing the arrow key up ( ) will set the fan to have a warmer room
temperature setting. Pressing the down arrow button ( ) will change the desired
room temperature setting to a cooler level.
When the fan is in operation, it will cycle on or off to maintain the desired
comfort setting.
On • Speed •
Off
Timer
H
M
L
Temp Set •
Manual
ROTATING GRILLE FEATURE
The Rotating Grille feature allows the grilles on the
fan to rotate, providing wider air distribution to
help cool your room.
• To activate, turn the hub in the center of each
grille1/4 turn to the right (Fig. 3). Now when
you use your fan in any speed the grilles will
rotate, expanding air circulation.
• To stop grille rotation, turn the center hub 1/4
turn counter-clockwise to the left.
On•Speed• Off
Timer
H M L
Temp Set • Manual
Fig. 3