Honeywell HW-400C Series - Manual (Page 5)

FEATURES - HW-500 ONLY
Timer: You can set your fan to conveniently turn itself off within one to nine hours.
To use this feature, press the “TIMER” button, “1H” will be displayed indicating
one hour. Press the “TIMER” button again for “2H”, repeat for up to 9 hours. The
time you have set will be displayed on the illuminated indicator screen. At the
end of the preset time, the fan will automatically turn itself off.
REMOTE CONTROL - HW-500 ONLY
The remote control can be used up to 26 feet (7.9m) away
from the fan. Be sure to point remote directly at the front of
the fan to ensure a proper response.
POWER: Press this button to turn fan on and off.
SPEED: Press the SPEED button to regulate speed settings as
described in the operation section.
AIRFLOW: Press this button to select either intake or exhaust as
described in the operation section.
TIMER: To use the TIMER function, press the TIMER button to
automatically turn fan off after 1 to 9 hours. See Timer section above for further
detail.
TEMP SET/MANUAL: To have fan run in continuous operation mode, touch button
once. To return to temperature mode, touch the TEMP SET/MANUAL button again.
NOTE: The remote control will work with the HW-500 only.
For manual operation touch the TEMP SET/MANUAL button once. The fan will
now run continuously and will not cycle on or off. The LED display will indicate (- -).
To return to the Thermostat Operation mode, press the TEMP SET/MANUAL
button again. The LED display will indicate the desired room temperature setting
and the LED light will be illuminated.
TEMP SET/MANUAL BUTTON
Speed
POWER
Air Flow
Timer Temp Set•
Manual
CLEANING AND STORAGE
• Turn fan to the OFF position and unplug the fan before cleaning.
• This fan does not disassemble.
• Use only a soft, damp cloth to gently wipe the surface of the fan clean.
• DO NOT immerse the fan in water and never allow water to enter the
motor housing.
• DO NOT use gasoline, paint thinner or other chemicals to clean the fan.
• For storage, clean the fan as instructed and store it in its original box or cover
with plastic to protect it from dust. Store your fan in a clean, dry place.