Homelegance DW15-PFE2S - Manual (Page 11)

Rinse aid Rinse aid Rinse aid Rinse aid Rinse aid
This product makes dishes sparkle and helps them to dry
without spotting. The dispenser is located on the inside panel
of the door .
Important Important Important Important Important
Proper dosage of the rinse aid improves drying. Proper dosage of the rinse aid improves drying. Proper dosage of the rinse aid improves drying. Proper dosage of the rinse aid improves drying. Proper dosage of the rinse aid improves drying.
If drops of water remain on the dishes or spotting occurs, the dosage adjus- If drops of water remain on the dishes or spotting occurs, the dosage adjus- If drops of water remain on the dishes or spotting occurs, the dosage adjus- If drops of water remain on the dishes or spotting occurs, the dosage adjus- If drops of water remain on the dishes or spotting occurs, the dosage adjus-
tor should be turned to a higher setting. tor should be turned to a higher setting. tor should be turned to a higher setting. tor should be turned to a higher setting. tor should be turned to a higher setting.
If the dishes have white streaks, turn the dosage adjustor to a lower setting. If the dishes have white streaks, turn the dosage adjustor to a lower setting. If the dishes have white streaks, turn the dosage adjustor to a lower setting. If the dishes have white streaks, turn the dosage adjustor to a lower setting. If the dishes have white streaks, turn the dosage adjustor to a lower setting.
Loading the rinse aid Loading the rinse aid Loading the rinse aid Loading the rinse aid Loading the rinse aid
Regardless of the type of detergent dispenser installed on
your appliance, you must proceed as indicated below when
loading the rinse aid.
To open the dispenser, turn the "22222" cap in an anti-clockwise
direction and then pour in the rinse aid, making sure not to
overfill. The amount of rinse aid used for each cycle can be
regulated by turning the " 3 3 3 3 3" dose adjustor, located beneath
the "22222" cap, with a screwdriver. There are 6 different settings;
the normal dosage setting is 3.
2
3
H
How to fill rinse aid
When the low rinse aid indicator “ H ” lights , you must load
rinse aid .
10